A user can not only use these on a cheap soft screws, but it will work up to grade 8 or 19.9 fasteners. You can use it on damaged screws such as Phillips, torxs, square drives, plastic or metal screws up to 3″. What we like best is that they are made right here in the good old USA. In order to make sure the Grabit system doesn’t wear out first, Alden uses a system where the metal is tempered twice for extra hardness. Since you are using this system metal on metal, one of them will have to give. The bits are self centering, so you don’t get any walking or wondering. This set comes with three screws and bolt extractors. We started to hear about the Grabit Pro, so we went to our local big box store and bought the Alden Grabit Pro set model number 8430P.
Just remember you are extracting a screw, so make sure your drill is in reverse when you use the system.
The bit actually sits in the first hole and grips the side of the screw to extract it. Then the user flips the bit over and drills the screw out. First a user will use one side of the bit to drill a shallow hole into the head of the screw or bolt. If you are not familiar with Grabit or a screw extractor system, the Grabit is a two step process. The Grabit can save you a lot of time, but most importantly, it saves you a lot of frustration. Well let us introduce the Grabit Pro by Alden. While some people deal with broken pencils, we deal with stripped screws and bolts. No matter how good you are, there are times you will strip a screw, it is just the way the world is. How many times have you ever tightened a screw, only to realize you went too far and stripped the screw? How many times have you tried to loosen a screw only to find that it was rusty and you stripped it? How many times, ok we will shut up, you get the point.
0 kommentar(er)
